Overview
Excelfab, Inc. operates a cooling tower in Santa Clara, California, supporting industrial metal fabrication and HVAC sectors. The facility is located in Silicon Valley's high-tech manufacturing hub.
Excelfab, Inc. operates a cooling tower at 870 Aldo Ave in Santa Clara, California, within Santa Clara County. This facility supports the company's metal fabrication and industrial equipment manufacturing operations, classified under NAICS codes 332116, 332322, and 333415. As a cooling tower, it provides process cooling for industrial activities, typical for manufacturing facilities in the region. The cooling tower operates under California's stringent environmental regulations, including the California Air Resources Board (CARB) rules on refrigerants and water efficiency. The facility likely uses evaporative cooling, which is common in California's climate, though water consumption is a key consideration given the state's drought conditions. For a mid-sized industrial plant, it would typically range from 100 to 500 tons of refrigeration. This cooling infrastructure plays a critical role in maintaining operational efficiency for Excelfab's manufacturing processes. In the context of Santa Clara's high-tech industrial base, the facility contributes to local economic activity while adhering to state-level environmental standards. The site's location in an urban industrial area underscores the integration of cooling systems in dense commercial zones.
Environmental context
Cooling towers in California face significant environmental scrutiny due to water consumption and refrigerant management. Evaporative cooling systems, common in the state, consume large volumes of water, which is a concern during droughts. Additionally, refrigerants used in cooling systems have high global-warming potential (GWP), and facilities must comply with CARB's refrigerant management program and the federal AIM Act to phase down HFCs. The facility's location in Santa Clara, part of the San Francisco Bay Area, also subjects it to local air quality regulations.
Frequently asked questions
The cooling tower is located at 870 Aldo Ave, Santa Clara, California 95054, United States, in Santa Clara County.
The cooling tower provides process cooling for Excelfab's industrial metal fabrication and equipment manufacturing operations, helping to dissipate heat from machinery and maintain optimal operating temperatures.
The specific capacity of Excelfab's cooling tower is not publicly listed. However, for a mid-sized industrial facility, cooling towers typically range from 100 to 500 tons of refrigeration.
Cooling towers in California must comply with the California Air Resources Board (CARB) refrigerant management program, the federal AIM Act phasing down HFCs, and local water conservation ordinances. Evaporative cooling towers also require permits for water discharge and may need to implement water efficiency measures.
Industrial cooling towers consume significant amounts of water, typically 1.5 to 3 gallons per minute per ton of refrigeration for evaporative systems. Water usage is a key environmental concern, especially in drought-prone regions like California.
Other Cooling Tower plants in United States · 6 nearby