Overview
M&M Cut O Matic Inc operates a cooling tower in Downey, California, supporting industrial manufacturing. The facility is part of the Los Angeles County infrastructure.
M&M Cut O Matic Inc operates a cooling tower at 9316 Washburn Rd in Downey, California, within Los Angeles County. This facility supports industrial manufacturing processes, specifically under NAICS code 333415 (Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing). The cooling tower is operational and serves as a key component for thermal management in the local industrial sector. Cooling towers in California operate under state and federal regulations, including ASHRAE 15 for refrigeration safety and the Kigali Amendment to the Montreal Protocol for refrigerant management. The facility's location in a densely populated urban area necessitates compliance with local environmental standards regarding water usage and refrigerant emissions. Typical cooling towers in this region range from small to medium capacity, often using evaporative cooling methods. The environmental significance of this cooling tower lies in its water consumption and potential refrigerant global-warming impact. Evaporative cooling towers, common in California's industrial sector, require significant water resources, which is a concern in drought-prone areas. The facility's operational efficiency and refrigerant choice are critical for minimizing its environmental footprint.
Environmental context
Cooling towers in Southern California face environmental challenges related to water scarcity and refrigerant emissions. Evaporative cooling systems consume large volumes of water, which is a critical issue in drought-prone regions like Los Angeles County. Additionally, the choice of refrigerant directly impacts global-warming potential, with regulations such as the Kigali Amendment driving a transition to lower-GWP alternatives.
Frequently asked questions
M&M Cut O Matic Inc is located at 9316 Washburn Rd, Downey, California 90242, in Los Angeles County, United States.
M&M Cut O Matic Inc operates a cooling tower that supports industrial manufacturing, specifically in the air-conditioning and refrigeration equipment manufacturing sector (NAICS 333415).
The specific capacity of the cooling tower is not publicly listed. Cooling towers in industrial settings typically range from small to medium capacity, depending on the facility's thermal load.
Cooling towers in California must comply with ASHRAE 15 for refrigeration safety, the Kigali Amendment to the Montreal Protocol for refrigerant phase-down, and state water efficiency standards. Facilities are also subject to local air quality and water discharge permits.
Cooling towers can have significant water consumption, especially evaporative types, and may use refrigerants with high global-warming potential. Proper maintenance and refrigerant management are essential to minimize environmental impact.
Other Cooling Tower plants in United States · 6 nearby