Overview
METAL TEK USA INC operates a cooling tower in Edgewater, Florida, serving metal fabrication and industrial sectors. The facility supports manufacturing processes with evaporative cooling technology.
METAL TEK USA INC is an operational cooling tower facility located at 735 S Airpark Rd, Edgewater, Florida, United States. The plant serves the metal fabrication industry, including NAICS codes 332321, 332322, 332439, and 333415, which cover sheet metal work, metal stamping, and industrial process controls. The facility operates under U.S. environmental regulations, including the Clean Air Act and EPA's refrigerant management requirements. As a cooling tower in Florida's humid subtropical climate, it likely uses evaporative cooling, which offers high efficiency but requires significant water consumption. Typical cooling towers for industrial applications range from small (under 500 tons) to large (over 5,000 tons) depending on process heat loads. Cooling towers play a critical role in industrial heat rejection, enabling continuous manufacturing operations. The facility's location in Volusia County supports local metal fabrication and industrial sectors, contributing to regional economic activity. Proper maintenance and water treatment are essential to prevent legionella and ensure operational reliability.
Environmental context
Cooling towers in Florida face environmental challenges including high water consumption from evaporative cooling and potential refrigerant leaks. The facility likely uses water treatment to minimize scale and biological growth. Refrigerant global-warming potential is a concern if chillers are used; however, U.S. regulations under the Clean Air Act phase down high-GWP refrigerants. The local humid climate increases cooling demand but also raises water usage, making water efficiency a key environmental factor.
Frequently asked questions
METAL TEK USA INC is located at 735 S Airpark Rd, Edgewater, Florida, United States, in Volusia County.
METAL TEK USA INC operates a cooling tower that provides heat rejection for industrial processes, supporting metal fabrication and manufacturing operations.
The specific capacity of the cooling tower is not publicly listed. Industrial cooling towers typically range from small (under 500 tons) to large (over 5,000 tons) depending on process requirements.
Cooling towers in the U.S. must comply with the Clean Air Act for refrigerant management, EPA's Risk Management Program for ammonia systems, and local water discharge permits. The Kigali Amendment to the Montreal Protocol also phases down high-GWP refrigerants.
Cooling towers consume water through evaporation and may use chemicals for water treatment. Refrigerant leaks can contribute to global warming. Proper maintenance and water conservation practices help mitigate environmental impacts.
Other Cooling Tower plants in United States · 6 nearby