Overview
RAHN INDUSTRIES operates a cooling tower in Chino, California, serving the air conditioning and aerospace sectors. The facility is located in San Bernardino County and is currently operational.
RAHN INDUSTRIES is a cooling tower facility located at 4586 DANITO CT in Chino, California, within San Bernardino County. The plant is operational and serves industries classified under NAICS codes 333415 (air conditioning and warm air heating equipment manufacturing) and 336391 (aerospace products and parts manufacturing). As a cooling tower, it provides heat rejection for industrial processes or HVAC systems. The facility operates under U.S. environmental regulations, including the Clean Air Act and the EPA's refrigerant management rules. Cooling towers in California are subject to state-level water efficiency standards and may use either evaporative or air-cooled technology. Typical cooling towers in this region range from small-scale (under 500 tons) to large-scale (over 5,000 tons) depending on the industrial application. Cooling towers play a critical role in maintaining operational efficiency for manufacturing and industrial facilities. In Chino, which has a semi-arid climate, water consumption and refrigerant management are key environmental considerations. The facility's compliance with ASHRAE 15 safety codes and the Kigali Amendment to the Montreal Protocol would be relevant for its refrigeration systems.
Environmental context
Cooling towers in California operate under strict water use regulations due to the state's drought-prone climate. Evaporative cooling towers consume significant water, while air-cooled systems reduce water use but may have higher energy consumption. Refrigerant management is critical, with the U.S. EPA phasing down high-GWP refrigerants under the American Innovation and Manufacturing (AIM) Act. The facility's location in San Bernardino County, which experiences hot summers, increases the importance of efficient cooling operations.
Frequently asked questions
RAHN INDUSTRIES is located at 4586 DANITO CT, Chino, California 91710, in San Bernardino County, United States.
RAHN INDUSTRIES operates a cooling tower facility that provides heat rejection for industrial processes, likely serving the air conditioning and aerospace manufacturing sectors.
The specific capacity of the RAHN INDUSTRIES cooling tower is not publicly listed. Cooling towers in industrial settings typically range from small (under 500 tons) to large (over 5,000 tons) depending on the application.
Cooling towers in the U.S. must comply with the Clean Air Act, EPA refrigerant management rules (including the AIM Act phasing down HFCs), and ASHRAE 15 safety standards. State-level water efficiency regulations also apply, especially in California.
Cooling towers can have significant water consumption (if evaporative) and energy use. Refrigerant leaks contribute to greenhouse gas emissions. Modern systems aim to improve efficiency (COP) and use low-GWP refrigerants under the Kigali Amendment.
Other Cooling Tower plants in United States · 6 nearby