Risk: Medium Cooling Tower Operational

STRUCTURAL COMPOSITES IND Cooling Tower, Pomona, California

POMONA, California, United States

Overview

STRUCTURAL COMPOSITES IND operates a cooling tower in Pomona, California, serving industrial air-conditioning and manufacturing processes. The facility is located in Los Angeles County and is operational.

STRUCTURAL COMPOSITES IND is a cooling tower facility located at 325 Enterprise Pl, Pomona, California, within Los Angeles County. The plant supports industrial cooling needs, likely for manufacturing or air-conditioning systems, and is classified under NAICS 333415 (Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing). As a cooling tower, it plays a role in heat rejection for local industrial processes. The facility operates under California's stringent environmental regulations, which align with ASHRAE 15 safety standards for refrigeration systems and the state's progressive refrigerant management policies. California has adopted the Kigali Amendment to the Montreal Protocol, driving a phase-down of high-global-warming-potential (GWP) refrigerants. Cooling towers in this region typically use water as a heat transfer medium, with efficiency measured by coefficient of performance (COP). Water consumption is a key consideration, especially in drought-prone Southern California. The environmental significance of this facility lies in its potential refrigerant use and water consumption. Cooling towers can have high water usage, and the choice of refrigerant (if any) impacts GWP. The plant's location in an urban industrial area means it contributes to local heat management and may be subject to air quality regulations. Its operational status ensures continued service to the local industrial sector.

Environmental context

Cooling towers in Southern California operate in a water-scarce region, making water efficiency critical. Evaporative cooling towers consume significant water, while air-cooled alternatives reduce water use at the cost of higher energy consumption. Refrigerant choice is also important; the facility likely uses refrigerants regulated under the Kigali Amendment and California's refrigerant management program, which targets high-GWP substances. The local climate, with hot summers, increases cooling demand, impacting both energy and water footprints.

Frequently asked questions

STRUCTURAL COMPOSITES IND is located at 325 Enterprise Pl, Pomona, California 91768, in Los Angeles County, United States.

STRUCTURAL COMPOSITES IND operates a cooling tower for industrial cooling applications, likely supporting manufacturing or air-conditioning systems. It is classified under NAICS 333415 for air-conditioning equipment manufacturing.

The specific cooling capacity of the STRUCTURAL COMPOSITES IND cooling tower is not publicly listed. Cooling towers in industrial settings typically range from small units (under 100 tons) to large systems (over 1,000 tons) depending on the facility's needs.

Cooling towers in California must comply with ASHRAE 15 safety standards for refrigeration, the state's refrigerant management program (which phases down high-GWP refrigerants under the Kigali Amendment), and local water use regulations. Additionally, they may need permits for air emissions and water discharge.

The Kigali Amendment to the Montreal Protocol requires a global phase-down of hydrofluorocarbons (HFCs), which are common refrigerants in cooling systems. Cooling towers that use HFCs must transition to lower-GWP alternatives over time, impacting maintenance and operational costs.

Other Cooling Tower plants in United States · 6 nearby

UtilityRadar
More
Press Esc to close · Browse by sector