Overview
SWEGON, INC. operates a cooling tower in Sparks, Nevada, United States. The facility supports HVAC manufacturing under NAICS 333415.
SWEGON, INC. is a cooling tower facility located at 2225 E. Greg St. #101 in Sparks, Nevada, United States. The plant is operational and serves the HVAC and air conditioning manufacturing sector, classified under NAICS 333415. As a cooling tower, it plays a role in heat rejection for industrial or commercial processes. The facility operates under U.S. regulatory frameworks, including ASHRAE 15 for refrigeration safety and the EPA's Significant New Alternatives Policy (SNAP) program governing refrigerants. Cooling towers in this region typically use water as a heat transfer medium, with efficiency measured by coefficient of performance (COP). The plant's scale is consistent with a manufacturing support facility, likely serving the local industrial base in Sparks. Cooling towers contribute to energy efficiency in HVAC systems but involve water consumption and potential for legionella growth if not maintained. The facility's location in Nevada, a state with arid climate, underscores the importance of water management. SWEGON, INC.'s operations align with sector trends toward low-global-warming-potential refrigerants and improved water conservation.
Environmental context
Cooling towers in arid regions like Nevada face water scarcity challenges, making water-efficient operation critical. The facility likely uses evaporative cooling, which consumes water but offers high efficiency. Refrigerant choice is governed by EPA SNAP rules, with a shift toward low-GWP alternatives. Proper maintenance is essential to prevent microbial growth and ensure energy performance.
Frequently asked questions
SWEGON, INC. is located at 2225 E. Greg St. #101 in Sparks, Nevada, United States.
SWEGON, INC. operates a cooling tower facility that supports HVAC and air conditioning manufacturing, classified under NAICS 333415.
The specific capacity of the SWEGON, INC. cooling tower is not publicly listed. Cooling towers in manufacturing facilities typically range from small to medium scale.
Cooling towers in the U.S. must comply with ASHRAE 15 for refrigeration safety and EPA SNAP rules for refrigerant management. Water treatment and discharge are regulated under the Clean Water Act.
The Kigali Amendment to the Montreal Protocol phases down high-GWP HFC refrigerants. U.S. cooling tower operators must transition to low-GWP alternatives under EPA SNAP rules.
Other Cooling Tower plants in United States · 6 nearby