Overview
Santa Maria de Lençóis is a 3.04 MW biomass power plant located in Brazil. It operates using biomass fuel and is currently operational.
Santa Maria de Lençóis is a biomass power plant located in Brazil, with a capacity of 3.04 MW. The plant is operational and contributes to the country's renewable energy generation from biomass sources. Brazil has a strong regulatory framework for renewable energy, including incentives for biomass power under the national energy policy. The plant operates under environmental regulations set by the Brazilian Institute of Environment and Renewable Natural Resources (IBAMA) and state-level agencies, which govern emissions and waste management for biomass facilities. The plant's small scale (3.04 MW) places it in the small-scale category for power generation. It supports local energy needs and contributes to Brazil's renewable energy mix, reducing reliance on fossil fuels. The use of biomass fuel can provide environmental benefits such as lower carbon emissions compared to coal, but requires sustainable sourcing of feedstock.
Environmental context
The plant uses biomass as fuel, which can have lower CO2 emissions compared to fossil fuels if sourced sustainably. Its small capacity (3.04 MW) limits its overall environmental footprint. Biomass plants typically require careful management of air emissions and ash disposal. The plant's location in Brazil, a country with abundant biomass resources, supports renewable energy goals.
Frequently asked questions
Santa Maria de Lençóis biomass power plant is located in Brazil, with coordinates approximately 22.5406° S, 48.8003° W.
The plant has a capacity of 3.04 MW, making it a small-scale biomass power facility.
The plant uses biomass as its primary fuel source.
Biomass power plants in Brazil must comply with environmental regulations set by IBAMA and state agencies, covering emissions, waste management, and sustainable sourcing of biomass feedstock.
As a renewable energy facility, it helps diversify Brazil's energy mix, reduce greenhouse gas emissions, and support local energy needs.