Risk: Medium Diesel Power Plant Operational

Sergipe Industrial Filial Diesel Power Plant, Brazil | Capacity and Operations

Brazil
Visit official website

Overview

Sergipe Industrial Filial is a 1.3 MW diesel power plant in Brazil. It operates on oil fuel and serves the local industrial sector.

Sergipe Industrial Filial is a small-scale diesel power plant located in Brazil, with an installed capacity of 1.296 MW. The facility is operational and primarily serves industrial customers in the Sergipe region. As a diesel-fired plant, it contributes to the local energy mix, providing backup or peak power generation. The plant operates under Brazil's national environmental regulations, which include emissions standards for stationary sources. Diesel power plants of this size typically use reciprocating engines and may have limited emission control technologies. The facility's capacity places it in the small-scale category for power generation in Brazil, where larger hydroelectric and thermal plants dominate the grid. Environmentally, the plant's reliance on oil fuel results in higher CO2 and local pollutant emissions per MWh compared to natural gas or renewable sources. Its location near the coast of Sergipe may influence local air quality, though the small capacity limits its overall impact. The facility plays a role in ensuring grid stability and meeting industrial demand in the region.

Environmental context

The plant uses oil as its primary fuel, which has a higher carbon intensity and emits more sulfur oxides (SOx) and nitrogen oxides (NOx) compared to natural gas. Its small capacity (1.3 MW) limits the overall environmental footprint, but local air quality near the facility may be affected. The plant operates in Brazil, where the national grid is largely hydroelectric, making diesel plants less common and typically used for peaking or backup power.

Frequently asked questions

Sergipe Industrial Filial is located in Brazil, near the coast of Sergipe state, with coordinates approximately 10.9°S, 37.1°W.

The plant has an installed capacity of 1.296 MW, making it a small-scale diesel power facility.

The plant operates on oil (diesel) as its primary fuel.

Diesel power plants in Brazil must comply with national emissions standards set by CONAMA (National Environment Council), including limits for particulate matter, NOx, and SOx. Facilities may also need environmental licenses from state agencies.

With a capacity of 1.3 MW, it is much smaller than Brazil's typical hydroelectric or large thermal plants. It likely serves as a backup or peaking unit for local industrial demand.
UtilityRadar
More
Press Esc to close · Browse by sector