Overview
BAMA CONCRETE BIRMINGHAM ALABASTER is a stormwater outfall in Alabaster, Alabama, USA. It operates under the US EPA NPDES MS4 permit framework for industrial stormwater discharges.
BAMA CONCRETE BIRMINGHAM ALABASTER is a stormwater outfall located at 2180 HWY 87 in Alabaster, Shelby County, Alabama. This facility manages stormwater runoff from a concrete manufacturing site, classified under NAICS 327320 (Ready-Mix Concrete Manufacturing). As an operational stormwater outfall, it is subject to the US EPA's National Pollutant Discharge Elimination System (NPDES) permitting program, specifically under the Multi-Sector General Permit (MSGP) for industrial activities. The facility operates within the regulatory framework of the Clean Water Act, which requires stormwater discharges from industrial sites to be covered by an NPDES permit. The MSGP sets effluent limits and monitoring requirements for pollutants commonly associated with concrete manufacturing, such as total suspended solids (TSS) and pH. The outfall likely includes best management practices (BMPs) like sediment basins or filtration systems to control runoff quality before discharge. Located in Alabaster, a growing suburb of Birmingham, this facility contributes to local stormwater management in an area with mixed urban and industrial land use. Proper management of stormwater from concrete plants is important to prevent sediment and alkaline runoff from impacting nearby water bodies, such as the Cahaba River or its tributaries. The facility's compliance with NPDES requirements helps protect local water quality and aquatic habitats.
Environmental context
The facility is located in Shelby County, Alabama, within the Cahaba River watershed, which is known for high aquatic biodiversity. Stormwater runoff from concrete manufacturing can carry high pH levels and sediment, posing risks to stream health if not properly managed. The area experiences a humid subtropical climate with frequent rainfall, increasing the potential for runoff events. Regulatory oversight under the NPDES MSGP ensures that the facility implements controls to mitigate these impacts, protecting downstream water quality.
Frequently asked questions
The facility is located at 2180 HWY 87 in Alabaster, Shelby County, Alabama, USA.
It is a stormwater outfall managing runoff from a concrete manufacturing site (NAICS 327320).
It operates under the US EPA NPDES Multi-Sector General Permit (MSGP) for industrial stormwater discharges, as required by the Clean Water Act.
Common pollutants include total suspended solids (TSS) from sediment and elevated pH from cement materials, which are regulated under the MSGP.
The facility implements best management practices (BMPs) such as sediment basins and pH control to treat runoff before discharge, in compliance with NPDES permit requirements.
Other Stormwater Outfall plants in United States · 6 nearby