Overview
BAMA FOUNDRY INC is a stormwater outfall in Montgomery, Alabama, United States. This industrial facility manages stormwater discharges under federal and state regulations.
BAMA FOUNDRY INC is a stormwater outfall located at 1427 N COURT ST in Montgomery, Alabama, United States. The facility is operational and classified under NAICS code 331511 (Iron Foundries), indicating an industrial catchment with potential for pollutant runoff. As a stormwater outfall, it discharges collected stormwater from the foundry site into local waterways. The facility operates under the U.S. EPA's National Pollutant Discharge Elimination System (NPDES) permitting framework, specifically the Multi-Sector General Permit (MSGP) for industrial stormwater discharges. In Alabama, the Alabama Department of Environmental Management (ADEM) administers the NPDES program. Industrial facilities like iron foundries are required to implement stormwater pollution prevention plans (SWPPPs) and monitor discharges for pollutants such as total suspended solids, metals, and pH. Located in Montgomery, the facility's stormwater discharges may affect the Alabama River watershed. The environmental significance lies in managing runoff from industrial operations to protect water quality. Compliance with permit limits and best management practices is critical to minimize impacts on receiving waters and support local water resource goals.
Environmental context
The facility is situated in Montgomery, Alabama, within the Alabama River basin. Industrial stormwater discharges from iron foundries can contain metals, oils, and sediments that may impair water quality if not properly managed. The region's climate includes frequent rainfall, increasing runoff volumes. Regulatory oversight under the NPDES MSGP requires monitoring and pollution prevention to protect downstream aquatic ecosystems.
Frequently asked questions
BAMA FOUNDRY INC is located at 1427 N COURT ST in Montgomery, Alabama, United States.
BAMA FOUNDRY INC is an industrial stormwater outfall that manages stormwater discharges from an iron foundry facility.
The NAICS code for BAMA FOUNDRY INC is 331511, which corresponds to Iron Foundries.
This outfall is regulated under the U.S. EPA's NPDES Multi-Sector General Permit (MSGP) for industrial stormwater discharges, administered by the Alabama Department of Environmental Management (ADEM).
Industrial stormwater can carry pollutants like metals, oils, and sediments. Proper management through SWPPPs and monitoring helps protect water quality in receiving streams and comply with the Clean Water Act.
Other Stormwater Outfall plants in United States · 6 nearby