Overview
BIRMINGHAM HIDE & TALLOW CO INC is an operational stormwater outfall in Bessemer, Alabama, USA. It manages runoff from a rendering facility under EPA NPDES MS4 regulations.
BIRMINGHAM HIDE & TALLOW CO INC is a stormwater outfall located at 5430 Johns Road in Bessemer, Jefferson County, Alabama, United States. The facility is operational and serves an industrial site classified under NAICS 311613 (Rendering and Meat Byproduct Processing). As a stormwater outfall, it discharges runoff from the facility's premises into local waterways, operating under the regulatory framework of the US Clean Water Act and EPA NPDES MS4 permits. The facility's primary technical function is to manage stormwater runoff from an industrial catchment area. In the United States, industrial stormwater discharges are regulated under the EPA's Multi-Sector General Permit (MSGP) or individual permits, which require monitoring of pollutants and implementation of best management practices (BMPs) to minimize environmental impact. The facility's location in an urban-industrial area of Bessemer subjects it to Phase II MS4 requirements, as smaller municipalities must develop stormwater management programs. Environmental significance lies in the potential for industrial stormwater to carry pollutants such as sediments, oils, and organic matter into receiving waters. The outfall likely discharges to a waterbody within the Black Warrior River watershed, which supports aquatic ecosystems and downstream water uses. Proper management of this outfall helps protect local water quality and comply with Total Maximum Daily Load (TMDL) requirements for impaired waters in the region.
Environmental context
The facility is situated in Bessemer, Alabama, within the Black Warrior River basin. This region experiences a humid subtropical climate with frequent rainfall, increasing the potential for stormwater runoff to carry industrial pollutants. The outfall discharges into a waterbody that may be listed as impaired under Section 303(d) of the Clean Water Act, requiring careful management of runoff to meet water quality standards. Industrial catchments like rendering facilities can contribute organic matter, nutrients, and pathogens, necessitating effective BMPs to protect aquatic life and downstream uses.
Frequently asked questions
The facility is located at 5430 Johns Road, Bessemer, Jefferson County, Alabama 35023-5973, United States.
It is a stormwater outfall that manages and discharges runoff from an industrial rendering facility (NAICS 311613) into local waterways, operating under US EPA stormwater regulations.
The outfall is subject to the US Clean Water Act and EPA NPDES MS4 permits. As an industrial facility, it must comply with the Multi-Sector General Permit (MSGP) for stormwater discharges, which requires monitoring and implementation of best management practices.
Industrial stormwater can carry pollutants like sediments, oils, and organic matter into receiving waters, potentially harming aquatic ecosystems and water quality. Proper management through BMPs and permit compliance is essential to minimize these impacts.
Located in Bessemer, Alabama, with a humid subtropical climate and frequent rainfall, the facility faces increased runoff volumes. Its industrial catchment requires robust BMPs to prevent pollutant discharge into the Black Warrior River watershed, which may have TMDL requirements for impaired waters.
Other Stormwater Outfall plants in United States · 6 nearby