Overview
CAROLINA STEEL GROUP, LLC operates a stormwater outfall in Montgomery, Alabama, managing industrial runoff from its metal fabrication facility under US EPA NPDES MS4 regulations.
CAROLINA STEEL GROUP, LLC is a stormwater outfall located at 1085 Parker Street in Montgomery, Alabama. This facility manages industrial stormwater runoff from a metal fabrication operation (NAICS 332312) and operates under the regulatory framework of the US Clean Water Act and EPA NPDES MS4 permits. As a stormwater outfall in an industrial catchment, the facility is subject to Phase II MS4 requirements for small municipalities, given Montgomery's population size. The outfall likely discharges to local water bodies, and compliance with stormwater pollution prevention plans (SWPPP) is critical to minimize pollutant loads from industrial activities. The facility's operational status is active, and its location in an urban-industrial area of Montgomery means stormwater management helps protect downstream water quality in the Alabama River basin. Proper maintenance of best management practices (BMPs) is essential to reduce sediment, metals, and other contaminants common in metal fabrication runoff.
Environmental context
The facility is situated in Montgomery, Alabama, within the Alabama River watershed. Industrial stormwater discharges from metal fabrication can contain heavy metals, oils, and suspended solids. Under the Clean Water Act, such outfalls must comply with NPDES permit limits to prevent impairment of receiving waters. The local climate, with frequent thunderstorms, increases runoff volumes and the risk of pollutant transport.
Frequently asked questions
CAROLINA STEEL GROUP, LLC is located at 1085 Parker Street in Montgomery, Alabama, USA.
This facility manages stormwater runoff from a metal fabrication operation (NAICS 332312) through a regulated outfall, ensuring compliance with stormwater pollution prevention requirements.
A stormwater outfall is a point where stormwater runoff is discharged from a facility or municipality into a receiving water body, often regulated under NPDES permits to control pollution.
This outfall is subject to the US Clean Water Act and EPA NPDES MS4 permit requirements, which mandate stormwater pollution prevention plans and best management practices for industrial facilities.
Industrial stormwater can carry pollutants like heavy metals, oils, and sediments. Proper management through BMPs helps protect downstream water bodies like the Alabama River from contamination.
Other Stormwater Outfall plants in United States · 6 nearby