Overview
CUTOFF ROAD ASPHALT PLANT is a stormwater outfall in Mobile, Alabama, United States. It operates under the US EPA NPDES MS4 permit framework for industrial stormwater discharges.
CUTOFF ROAD ASPHALT PLANT is a stormwater outfall located at 1920 Cut-Off Road in Mobile, Alabama, United States. The facility is operational and classified under NAICS code 324121 (Asphalt Paving Mixture and Block Manufacturing), indicating an industrial catchment with potential stormwater runoff concerns. As a stormwater outfall in the United States, this facility is subject to the Clean Water Act and likely operates under an NPDES MS4 permit, either as part of a Phase I large municipality (Mobile's population >250,000) or Phase II small MS4. Industrial stormwater discharges from asphalt plants typically require permits under the EPA's Multi-Sector General Permit (MSGP) or an individual permit, with requirements for stormwater pollution prevention plans (SWPPPs) and monitoring. The facility's stormwater outfall discharges into local water bodies in Mobile County, which may include the Mobile River or Mobile Bay. Given the industrial nature of the catchment, stormwater runoff may contain pollutants such as sediments, oils, and heavy metals. Proper management is essential to protect downstream water quality and aquatic ecosystems.
Environmental context
Mobile, Alabama, is located on the Gulf Coast with a humid subtropical climate, receiving over 60 inches of rainfall annually. This high precipitation increases stormwater runoff volumes and pollutant loads. The facility's industrial catchment (asphalt plant) may contribute pollutants like total suspended solids, hydrocarbons, and metals to local waterways. Discharges likely enter the Mobile River system, which flows into Mobile Bay, an ecologically important estuary. The area is subject to EPA NPDES regulations for stormwater, requiring best management practices (BMPs) to control runoff.
Frequently asked questions
CUTOFF ROAD ASPHALT PLANT is located at 1920 Cut-Off Road in Mobile, Alabama, United States, in Mobile County.
It is a stormwater outfall for an asphalt plant, managing industrial stormwater runoff under the US EPA NPDES MS4 permit program.
The facility operates under NAICS code 324121, which covers Asphalt Paving Mixture and Block Manufacturing.
Stormwater outfalls in Alabama are regulated under the Clean Water Act via the NPDES MS4 permit program, administered by the Alabama Department of Environmental Management (ADEM). Industrial facilities must also comply with the EPA's Multi-Sector General Permit (MSGP) for stormwater discharges.
Industrial stormwater runoff can carry pollutants such as sediments, chemicals, and heavy metals into waterways. Proper management through permits, pollution prevention plans, and best management practices protects water quality and aquatic ecosystems.
Other Stormwater Outfall plants in United States · 6 nearby