DN MACHINING Stormwater Outfall, Greenwood, Arkansas | United States

DN MACHINING is a stormwater outfall facility located at 18320 HWY 171 SOUTH in Greenwood, Arkansas, United States. The facility is operational and serves as a point of discharge for stormwater runoff from an industrial machining site. As a stormwater outfall, it is part of the broader stormwater management infrastructure regulated under the US EPA's National Pollutant Discharge Elimination System (NPDES) program. In the United States, stormwater outfalls like DN MACHINING are typically subject to NPDES MS4 permits, which require monitoring and control of pollutants in stormwater discharges. The facility's location in Arkansas places it under the jurisdiction of the Arkansas Department of Energy and Environment - Division of Environmental Quality. Industrial stormwater outfalls often require compliance with sector-specific effluent guidelines and best management practices to minimize environmental impact. The facility's discharge contributes to the local watershed in the Greenwood area. Proper management of stormwater from industrial sites is critical to prevent contamination of receiving water bodies with pollutants such as heavy metals, oils, and sediments. The operational status of DN MACHINING indicates ongoing compliance with regulatory requirements to protect water quality in the region.

The facility is located in Greenwood, Arkansas, within the Arkansas River basin. Stormwater runoff from industrial sites in this region can carry pollutants such as metals, hydrocarbons, and sediment into local waterways. The area experiences a humid subtropical climate with significant rainfall, increasing the potential for runoff and erosion. Regulatory oversight under the Clean Water Act aims to mitigate these impacts through NPDES permits and best management practices.