Overview
HARMON SCRAP METAL - ATHENS is an operational stormwater outfall in Athens, Alabama, serving an industrial scrap metal facility. It operates under US EPA NPDES MS4 regulations.
HARMON SCRAP METAL - ATHENS is a stormwater outfall located at 24537 US-72 in Athens, Limestone County, Alabama. This facility manages stormwater runoff from an industrial scrap metal recycling site, classified under NAICS 423930. As a stormwater outfall, it discharges collected runoff into local waterways, subject to federal and state regulations. The facility operates under the US EPA National Pollutant Discharge Elimination System (NPDES) program, specifically under MS4 permits for industrial stormwater discharges. In Alabama, the Alabama Department of Environmental Management (ADEM) oversees compliance with the Clean Water Act. Typical stormwater management at such sites includes sediment basins, oil-water separators, and best management practices (BMPs) to control pollutants. This outfall is part of a network managing runoff from a scrap metal facility, which can contain metals, oils, and sediments. Proper management is critical to protect nearby water bodies in the Tennessee River basin. The facility's location in an industrial area underscores the importance of regulatory compliance to minimize environmental impact.
Environmental context
The outfall discharges stormwater from an industrial scrap metal facility, which may contain pollutants such as heavy metals, oils, and sediments. The site is located in the Tennessee River watershed, where water quality is a concern due to agricultural and industrial activities. Compliance with NPDES permits is essential to prevent degradation of receiving waters.
Frequently asked questions
HARMON SCRAP METAL - ATHENS is located at 24537 US-72 in Athens, Limestone County, Alabama, United States.
It is a stormwater outfall that manages runoff from an industrial scrap metal recycling facility, classified under NAICS 423930.
The facility operates under the US EPA NPDES program, specifically MS4 permits for industrial stormwater discharges, enforced by the Alabama Department of Environmental Management (ADEM).
Stormwater from scrap metal facilities may contain heavy metals (e.g., lead, copper), oils, grease, and sediments, requiring treatment through BMPs like sediment basins and oil-water separators.
The Clean Water Act requires NPDES permits for point source discharges, including stormwater outfalls from industrial activities, to protect water quality and aquatic ecosystems.
Other Stormwater Outfall plants in United States · 6 nearby