Overview
ITW SEXTON CAN INC is an operational stormwater outfall in Decatur, Alabama, United States. It manages runoff from industrial metal can manufacturing facilities under NAICS codes 332431 and 332439.
ITW SEXTON CAN INC is a stormwater outfall located at 3101 Sexton Rd in Decatur, Morgan County, Alabama, United States. The facility is operational and serves as a discharge point for stormwater runoff from industrial metal can manufacturing operations, classified under NAICS codes 332431 (Metal Can Manufacturing) and 332439 (Other Metal Container Manufacturing). As a stormwater outfall in the United States, this facility operates under the Clean Water Act and is subject to National Pollutant Discharge Elimination System (NPDES) permit requirements. Industrial stormwater discharges are regulated under the EPA's Multi-Sector General Permit (MSGP) or individual permits, which mandate best management practices (BMPs) for pollution prevention and monitoring of stormwater quality. The facility is located in Decatur, Alabama, an industrial hub along the Tennessee River. Stormwater runoff from industrial sites can carry pollutants such as metals, oils, and sediments, which may impact local water quality. Proper management of this outfall is important for protecting downstream water bodies and complying with federal and state stormwater regulations.
Environmental context
The facility is situated in Decatur, Alabama, within the Tennessee River watershed. The region experiences a humid subtropical climate with significant rainfall, increasing the potential for stormwater runoff from industrial areas. Industrial stormwater discharges can contain pollutants like heavy metals and hydrocarbons, which may affect aquatic ecosystems. Regulatory oversight under the Clean Water Act and Alabama's NPDES program aims to minimize these impacts through permit conditions and monitoring requirements.
Frequently asked questions
ITW SEXTON CAN INC is located at 3101 Sexton Rd, Decatur, Alabama 35603, United States.
ITW SEXTON CAN INC is a stormwater outfall that discharges runoff from industrial metal can manufacturing facilities. It is subject to NPDES stormwater regulations.
The facility operates under NAICS codes 332431 (Metal Can Manufacturing) and 332439 (Other Metal Container Manufacturing).
This outfall is regulated under the Clean Water Act and the EPA's NPDES program, likely under the Multi-Sector General Permit (MSGP) for industrial stormwater discharges.
Industrial stormwater management uses best management practices (BMPs) to reduce pollutants like metals and sediments, protecting local water bodies and aquatic life.
Other Stormwater Outfall plants in United States · 6 nearby