Overview
MID-SOUTH FABRICATIONS INC is a stormwater outfall in Jemison, Alabama, United States. It serves an industrial facility under the Clean Water Act regulatory framework.
MID-SOUTH FABRICATIONS INC is a stormwater outfall located at 26890 Highway 31 in Jemison, Chilton County, Alabama, United States. The facility is operational and classified under NAICS code 332999 (All Other Miscellaneous Fabricated Metal Product Manufacturing), indicating an industrial catchment for stormwater discharge. As a stormwater outfall in the United States, this facility operates under the Clean Water Act and is likely subject to National Pollutant Discharge Elimination System (NPDES) permit requirements, specifically the Multi-Sector General Permit (MSGP) for industrial stormwater discharges. The facility's location in Alabama places it under the jurisdiction of the Alabama Department of Environmental Management (ADEM) for permitting and compliance. The outfall discharges stormwater from an industrial site, which may contain pollutants such as metals, oils, and sediments. Proper management and treatment of stormwater are essential to protect local water quality and comply with regulatory standards. The facility's environmental significance lies in its role in managing runoff from an industrial area to minimize impacts on receiving waters.
Environmental context
The facility is located in Chilton County, Alabama, an area with a mix of agricultural and industrial land uses. Stormwater runoff from industrial sites like MID-SOUTH FABRICATIONS INC can carry pollutants such as heavy metals, hydrocarbons, and suspended solids. The outfall likely discharges to a local waterbody, which may be subject to Total Maximum Daily Load (TMDL) requirements under the Clean Water Act. Compliance with NPDES permit conditions is critical to prevent degradation of water quality in the region.
Frequently asked questions
MID-SOUTH FABRICATIONS INC is located at 26890 Highway 31 in Jemison, Chilton County, Alabama, United States.
It is a stormwater outfall serving an industrial facility classified under NAICS 332999 (All Other Miscellaneous Fabricated Metal Product Manufacturing).
The outfall is regulated under the Clean Water Act and is likely covered by an NPDES Multi-Sector General Permit for industrial stormwater discharges, administered by the Alabama Department of Environmental Management.
Industrial stormwater discharges can contain pollutants such as metals, oils, grease, and sediments. The specific pollutants depend on the manufacturing processes at the facility.
The outfall discharges stormwater to a local waterbody. Proper management under the NPDES permit helps control pollutant loads and protect water quality in the region.
Other Stormwater Outfall plants in United States · 6 nearby