Overview
OFLEX METAL FINISHING is a stormwater outfall in Clanton, Alabama, USA. It operates under US EPA NPDES MS4 regulations for industrial stormwater discharges.
OFLEX METAL FINISHING is a stormwater outfall located at 725 Keystone Drive in Clanton, Chilton County, Alabama, United States. The facility is operational and classified under NAICS codes 332813 (Electroplating) and 332996 (Fabricated Metal Product Manufacturing), indicating an industrial catchment with potential metal finishing operations. As a stormwater outfall in the United States, this facility is subject to the Clean Water Act and likely operates under an NPDES permit for industrial stormwater discharges. The EPA's MS4 program may also apply if the outfall discharges to a municipal separate storm sewer system. Industrial stormwater permits typically require implementation of best management practices (BMPs) and monitoring for pollutants such as metals, oils, and suspended solids. The facility's location in Clanton, Alabama, places it within a region with a humid subtropical climate, characterized by significant rainfall throughout the year. This increases the importance of proper stormwater management to prevent runoff of industrial pollutants into local waterways. The outfall likely discharges to a nearby waterbody, potentially affecting water quality in the Cahaba River watershed or other local streams.
Environmental context
The facility is located in Chilton County, Alabama, within the Cahaba River watershed, which is known for high aquatic biodiversity. Industrial stormwater discharges from metal finishing operations can introduce heavy metals and other pollutants into receiving waters, posing risks to aquatic life and downstream water quality. The humid subtropical climate with frequent rainfall increases runoff volumes, making effective stormwater management critical to protect local ecosystems.
Frequently asked questions
OFLEX METAL FINISHING is located at 725 Keystone Drive, Clanton, Chilton County, Alabama 35045-5483, United States.
OFLEX METAL FINISHING is a stormwater outfall associated with industrial metal finishing operations, classified under NAICS codes 332813 (Electroplating) and 332996 (Fabricated Metal Product Manufacturing).
Stormwater outfalls in Alabama are regulated under the Clean Water Act through the NPDES permit program. Industrial facilities must obtain coverage under the Multi-Sector General Permit (MSGP) for stormwater discharges, which requires implementation of stormwater pollution prevention plans (SWPPPs) and monitoring.
Common pollutants from metal finishing stormwater include heavy metals such as copper, nickel, chromium, and zinc, as well as oils, grease, and suspended solids. These can harm aquatic life if not properly managed.
The EPA regulates industrial stormwater discharges under the NPDES program. Facilities must apply for permit coverage, develop a SWPPP, implement best management practices (BMPs), and conduct periodic monitoring to ensure compliance with effluent limits.
Other Stormwater Outfall plants in United States · 6 nearby