Overview
PHENIX LUMBER CO is an operational stormwater outfall in Phenix, Alabama, USA. It manages runoff from lumber and wood product manufacturing activities under NPDES MS4 permit requirements.
PHENIX LUMBER CO is a stormwater outfall located at 4 Cut Rate Rd in Phenix, Russell County, Alabama. The facility is operational and serves as a discharge point for stormwater runoff from industrial activities related to lumber and wood product manufacturing, as classified by NAICS codes 237310, 321113, 321912, and 321999. As a stormwater outfall in the United States, this facility operates under the Clean Water Act and is subject to NPDES MS4 permit regulations. In Alabama, the Alabama Department of Environmental Management (ADEM) administers the NPDES program. The facility's industrial catchment area likely requires compliance with stormwater pollution prevention plans (SWPPP) and best management practices (BMPs) to control runoff. The environmental significance of this outfall lies in its potential impact on local water bodies. Runoff from lumber and wood product facilities can contain pollutants such as sediment, nutrients, and chemicals. Proper management is essential to protect water quality in the surrounding region, which includes the Chattahoochee River watershed.
Environmental context
The facility is located in Phenix, Alabama, near the Chattahoochee River, which forms the border between Alabama and Georgia. This region experiences a humid subtropical climate with significant rainfall, increasing the potential for stormwater runoff. The outfall discharges into a water body that may be subject to Total Maximum Daily Load (TMDL) requirements for pollutants like sediment or nutrients. Industrial stormwater from lumber operations can carry suspended solids and organic matter, necessitating effective erosion and sediment control measures.
Frequently asked questions
PHENIX LUMBER CO is located at 4 Cut Rate Rd in Phenix, Russell County, Alabama, USA.
It is a stormwater outfall that discharges runoff from industrial lumber and wood product manufacturing activities, regulated under the NPDES MS4 permit program.
The facility operates under NAICS codes 237310 (Highway, Street, and Bridge Construction), 321113 (Sawmills), 321912 (Cut Stock, Resawing Lumber, and Planing), and 321999 (All Other Miscellaneous Wood Product Manufacturing).
Stormwater discharges in Alabama are regulated under the NPDES program administered by the Alabama Department of Environmental Management (ADEM). Industrial facilities must obtain coverage under a Multi-Sector General Permit (MSGP) and implement stormwater pollution prevention plans.
Common pollutants from lumber and wood product facilities include sediment, total suspended solids (TSS), nutrients, and chemicals such as pesticides or preservatives. Best management practices like silt fences and vegetative buffers are used to control runoff.
Other Stormwater Outfall plants in United States · 6 nearby