Overview
R&M Machine Shop Inc. operates a stormwater outfall in Fyffe, Alabama, managing runoff from industrial machining operations under EPA NPDES MS4 regulations.
R&M Machine Shop Inc. is a stormwater outfall facility located at 38336 Highway 75 in Fyffe, DeKalb County, Alabama, United States. The facility is operational and manages stormwater runoff from industrial activities associated with NAICS codes 332710 (Machine Shops) and 332721 (Precision Turned Product Manufacturing). As a stormwater outfall, it discharges collected runoff into local waterways, subject to regulatory oversight. The facility operates under the U.S. EPA's National Pollutant Discharge Elimination System (NPDES) permitting framework, specifically under the Clean Water Act. Industrial stormwater discharges are regulated through Multi-Sector General Permits (MSGP) or individual permits, requiring compliance with effluent limits and monitoring for pollutants such as total suspended solids, oil and grease, and metals. The facility's location in a small municipality like Fyffe may fall under Phase II MS4 requirements, which mandate stormwater management programs for smaller urbanized areas. Environmental significance lies in its role in managing industrial stormwater runoff to protect water quality in receiving streams. DeKalb County is part of the Tennessee River watershed, and proper stormwater treatment helps prevent contamination from machining operations, including heavy metals and hydrocarbons. The facility contributes to local flood control and erosion prevention, supporting community and ecological health.
Environmental context
The facility is located in DeKalb County, Alabama, within the Tennessee River watershed. Industrial stormwater runoff from machining operations can carry pollutants such as heavy metals, oils, and sediments. The region's climate, with frequent rainfall, increases the risk of runoff events. Proper management of stormwater outfalls is critical to prevent degradation of local water bodies, which support aquatic life and recreational uses.
Frequently asked questions
R&M Machine Shop Inc. is located at 38336 Highway 75 in Fyffe, DeKalb County, Alabama, United States.
It is a stormwater outfall facility that manages industrial stormwater runoff from machining operations, discharging it into local waterways under NPDES permit requirements.
The facility serves machine shops (NAICS 332710) and precision turned product manufacturing (NAICS 332721), which involve metalworking and machining activities.
The facility is regulated under the U.S. Clean Water Act through the NPDES program, likely under the Multi-Sector General Permit for industrial stormwater discharges, which sets effluent limits and monitoring requirements.
By managing stormwater runoff, it helps prevent pollution of nearby streams and the Tennessee River watershed, protecting water quality and aquatic habitats from contaminants like heavy metals and oils.
Other Stormwater Outfall plants in United States · 6 nearby