Overview
RAIBOW FIBERGLASS AND BOAT REPAIR AT SMIC is an operational stormwater outfall in Seward, Alaska, managing runoff from industrial and boat repair activities under the US EPA NPDES MS4 permit framework.
RAIBOW FIBERGLASS AND BOAT REPAIR AT SMIC is a stormwater outfall located in Seward, Alaska, within Kenai Peninsula County. This facility manages stormwater discharge from an industrial site involved in fiberglass and boat repair operations, contributing to local stormwater management in a coastal Alaskan community. As a stormwater outfall, this facility operates under the US EPA's National Pollutant Discharge Elimination System (NPDES) Municipal Separate Storm Sewer System (MS4) permit program. Given its location in Alaska, it may be subject to both federal Clean Water Act requirements and state-level regulations. The facility's discharge likely handles runoff from impervious surfaces and industrial areas, requiring best management practices to control pollutants. The environmental significance of this outfall lies in its potential impact on nearby water bodies in the Seward area, including Resurrection Bay. Proper stormwater management is critical to protect aquatic habitats and water quality in this ecologically sensitive region. The facility's role in treating industrial stormwater runoff helps mitigate risks from boat repair activities.
Environmental context
Seward, Alaska, is a coastal community on Resurrection Bay, an ecologically important water body supporting salmon runs, marine mammals, and diverse aquatic life. Stormwater runoff from industrial sites like boat repair facilities can carry pollutants such as heavy metals, hydrocarbons, and sediments. Under the Clean Water Act, NPDES MS4 permits require controls to minimize these impacts. The facility's discharge must comply with water quality standards to protect the bay's sensitive ecosystem.
Frequently asked questions
The facility is located at 208 Nash Road and 3409 Morris Road in Seward, Alaska, within Kenai Peninsula County.
It is a stormwater outfall that manages runoff from an industrial site involved in fiberglass and boat repair activities, discharging stormwater under NPDES MS4 permit requirements.
Stormwater outfalls in Alaska are regulated under the US EPA's NPDES MS4 permit program, which requires permits for discharges from municipal separate storm sewer systems and industrial sites to protect water quality.
Runoff from boat repair can contain pollutants like heavy metals, oils, and chemicals. Proper management through permits and best practices is essential to prevent contamination of nearby water bodies like Resurrection Bay.
The Clean Water Act establishes the NPDES permit system to regulate point source discharges, including stormwater outfalls, to ensure compliance with water quality standards and protect aquatic ecosystems.
Other Stormwater Outfall plants in United States · 6 nearby