Overview
READY MIX USA, LLC - LINCOLN FACILITY is a stormwater outfall in Lincoln, Alabama, serving the ready-mix concrete industry. It operates under US EPA NPDES MS4 regulations for industrial stormwater discharges.
READY MIX USA, LLC - LINCOLN FACILITY is a stormwater outfall located at 100 Speedway Industrial Drive in Lincoln, Talladega County, Alabama. This facility manages stormwater runoff from a ready-mix concrete plant, a common industrial source in the region. As a stormwater outfall, it discharges collected runoff into local waterways, subject to federal and state regulations. The facility operates under the US EPA National Pollutant Discharge Elimination System (NPDES) permitting framework, specifically the Multi-Sector General Permit (MSGP) for industrial activities. The ready-mix concrete sector is required to implement best management practices (BMPs) to control pollutants such as sediment, pH, and concrete washout. The facility's location in an industrial area near Speedway Industrial Drive suggests a focus on managing runoff from impervious surfaces and material storage areas. Stormwater outfalls like this one play a critical role in preventing untreated runoff from entering water bodies. In Alabama, the Alabama Department of Environmental Management (ADEM) oversees compliance with Clean Water Act requirements. The facility's operational status indicates ongoing management of stormwater to protect local water quality, particularly in the Coosa River basin which receives drainage from this area.
Environmental context
The facility is located in Lincoln, Alabama, within the Coosa River watershed, a region with significant industrial and urban development. Stormwater runoff from industrial sites like ready-mix concrete plants can carry sediment, heavy metals, and alkaline washwater, posing risks to aquatic habitats. The area's clay soils and rolling topography increase erosion potential, making sediment control a key concern. Regulatory oversight under the Clean Water Act requires facilities to implement pollution prevention plans and monitor discharge quality to protect downstream water bodies.
Frequently asked questions
The facility is located at 100 Speedway Industrial Drive in Lincoln, Talladega County, Alabama, USA.
It is a stormwater outfall that manages runoff from a ready-mix concrete plant, classified under the industrial stormwater sector.
The facility operates under the US EPA NPDES Multi-Sector General Permit (MSGP) for industrial activities, requiring pollution prevention plans and best management practices.
Common pollutants include sediment, elevated pH from cement washout, and trace metals. Facilities must implement controls like sediment basins and pH neutralization.
By complying with NPDES permit conditions, the facility implements structural and non-structural controls to reduce pollutant loads before discharge into the Coosa River watershed.
Other Stormwater Outfall plants in United States · 6 nearby