Overview
TOPRE AMERICA CORPORATION operates a stormwater outfall in Cullman, Alabama, serving industrial facilities. The outfall manages runoff from manufacturing operations under US EPA NPDES MS4 regulations.
TOPRE AMERICA CORPORATION operates a stormwater outfall located at 1580 County Road 222 in Cullman, Alabama. This facility manages stormwater runoff from industrial activities, including automotive parts manufacturing (NAICS 336370) and other sectors. As a stormwater outfall, it discharges collected runoff into local waterways, subject to federal and state regulations. The outfall operates under the US EPA National Pollutant Discharge Elimination System (NPDES) permitting framework, which governs stormwater discharges from industrial facilities. In Alabama, the Alabama Department of Environmental Management (ADEM) administers the NPDES program. Facilities like TOPRE AMERICA CORPORATION must implement Stormwater Pollution Prevention Plans (SWPPPs) to minimize pollutant runoff. This outfall serves an industrial catchment in Cullman County, contributing to local water quality management. Proper stormwater management is critical to protect receiving waters from sediment, chemicals, and other pollutants associated with manufacturing. The facility's compliance with permit conditions helps safeguard downstream ecosystems and community water resources.
Environmental context
The outfall discharges into a watershed that may receive runoff from industrial and agricultural areas in Cullman County. Stormwater from manufacturing facilities can carry pollutants such as heavy metals, oils, and suspended solids. Effective treatment and best management practices are essential to prevent degradation of local streams and rivers, which support aquatic life and recreational uses.
Frequently asked questions
The outfall is located at 1580 County Road 222, Cullman, Alabama 35057, United States.
It manages stormwater runoff from industrial operations, including automotive parts manufacturing, by collecting and discharging it under an NPDES permit to comply with Clean Water Act regulations.
Industrial stormwater outfalls in Alabama are regulated under the US EPA NPDES program, administered by ADEM. Facilities must obtain permit coverage, implement SWPPPs, and monitor discharges to protect water quality.
Common pollutants include oil and grease, heavy metals (e.g., zinc, copper), suspended solids, and chemicals from metalworking and painting processes. Best management practices like sediment basins and oil-water separators help reduce these pollutants.
The Clean Water Act requires NPDES permits for point source discharges, including stormwater from industrial activities. Permits set limits on pollutant levels and require monitoring to ensure discharges do not impair water quality.
Other Stormwater Outfall plants in United States · 6 nearby