Overview
Tuskegee Ready Mix is a stormwater outfall in Montgomery, Alabama, United States. It operates under the EPA NPDES MS4 permit framework for industrial stormwater discharges.
Tuskegee Ready Mix is a stormwater outfall located at 2091 Blackshear in Montgomery, Alabama, United States. The facility is operational and classified under NAICS code 327320 (Ready-Mix Concrete Manufacturing), indicating an industrial catchment with potential for sediment and pollutant runoff. As a stormwater outfall in the United States, this facility is subject to the Clean Water Act and likely operates under an EPA NPDES MS4 permit. Industrial stormwater discharges from concrete manufacturing often require best management practices (BMPs) to control pH, total suspended solids, and other pollutants. The regulatory framework for such facilities includes Phase II MS4 requirements for small municipalities, which apply to Montgomery. The environmental significance of this outfall lies in its potential impact on local water bodies. Stormwater runoff from industrial sites can carry pollutants that affect water quality. Proper management and compliance with permit conditions are essential to minimize ecological harm. The facility's location in an urban area of Montgomery underscores the importance of stormwater control in protecting downstream ecosystems.
Environmental context
Montgomery, Alabama, experiences a humid subtropical climate with frequent rainfall, making stormwater management critical. The outfall discharges into local waterways that may be impaired by urban and industrial runoff. Concrete manufacturing operations can generate alkaline runoff and sediment, posing risks to aquatic life. Regulatory oversight under the EPA NPDES program aims to mitigate these impacts through site-specific controls.
Frequently asked questions
Tuskegee Ready Mix is located at 2091 Blackshear in Montgomery, Alabama, United States.
Tuskegee Ready Mix is a stormwater outfall associated with a ready-mix concrete manufacturing facility (NAICS 327320). It manages industrial stormwater discharges under the EPA NPDES MS4 permit program.
The NAICS code for Tuskegee Ready Mix is 327320, which corresponds to Ready-Mix Concrete Manufacturing.
Stormwater outfalls in Alabama are regulated under the Clean Water Act through the EPA NPDES MS4 permit program. Industrial facilities must implement stormwater pollution prevention plans (SWPPPs) and obtain permit coverage.
Stormwater from concrete plants can contain high pH levels, total suspended solids, and other pollutants. If not properly managed, it can harm aquatic life and degrade water quality in receiving streams.
Other Stormwater Outfall plants in United States · 6 nearby