Overview
Gulf Coast Plating, Inc. operates a stormwater outfall in Attalla, Alabama, serving an industrial catchment under the US EPA NPDES MS4 permitting framework.
Gulf Coast Plating, Inc. is a stormwater outfall located at 100 Utility Avenue in Attalla, Etowah County, Alabama, United States. The facility is operational and serves an industrial catchment, with NAICS code 332813 indicating electroplating, plating, polishing, anodizing, and coloring. As a stormwater outfall, it discharges stormwater runoff from the industrial site into local waterways. The facility operates under the regulatory framework of the US Clean Water Act, specifically the National Pollutant Discharge Elimination System (NPDES) program. Stormwater discharges from industrial activities are typically regulated under NPDES Multi-Sector General Permits (MSGP) or individual permits. The facility's location in Alabama places it under the jurisdiction of the Alabama Department of Environmental Management (ADEM) for permitting and compliance. The environmental significance of this outfall lies in its potential to affect receiving water quality. Industrial stormwater runoff can contain pollutants such as metals, oils, and solids from plating operations. Proper management through best management practices (BMPs) and compliance with permit limits is essential to protect downstream water bodies in the Etowah County area.
Environmental context
The facility is located in Attalla, Alabama, within the Coosa River watershed. The region experiences a humid subtropical climate with significant rainfall, which can increase stormwater runoff volumes. Industrial stormwater discharges from plating facilities may contain heavy metals and other contaminants that could impact aquatic ecosystems if not properly managed. The outfall's discharge point likely flows into a tributary of the Coosa River, which is an important water resource for the region.
Frequently asked questions
Gulf Coast Plating, Inc. is located at 100 Utility Avenue in Attalla, Etowah County, Alabama, United States.
Gulf Coast Plating, Inc. operates a stormwater outfall that discharges industrial stormwater runoff from electroplating and metal finishing operations.
The NAICS code for Gulf Coast Plating, Inc. is 332813, which covers electroplating, plating, polishing, anodizing, and coloring.
This stormwater outfall is regulated under the US Clean Water Act through the National Pollutant Discharge Elimination System (NPDES) program, likely under an industrial stormwater general permit.
Industrial stormwater outfalls can discharge pollutants such as heavy metals, oils, and sediments into waterways, potentially affecting water quality and aquatic life. Proper management and treatment are required to minimize impacts.
Other Stormwater Outfall plants in United States · 6 nearby